CP Sapling m0 Development Board
SKU:
OAK6
$11.00
$11.00
per item
Finally, a tree that runs CircuitPython? YEP! Now you can get working in CircuitPython faster with our new CircuitPython compatible development board featuring the popular Microchip AT SAM D21 microcontroller.
Providing quick and easy access to SPI and I2C so you can get your project off the ground in no time.
This board also comes with the pads available on the bottom of the board to enable it to expand storage with SPI FLASH! (Current SPI flash build uses AT25DF081A)
THIS BOARD IS DEPRECIATED. It will still continue to receive circuitpython updates for the foreseeable future. This board will be replaced in production by the CP Sapling Rev B.
1 available
FeaturesMicrochip AT SAM D21 E18A ARM Cortex M0 32bit MCU
3535 Neopixel Stemma QT/ Qwiic compatible I2C connector SPI interface 8 SOIC pad for additional SPI Flash storage 3.3V Regulator with up to 500mA max current output |
Datasheets/DownloadsDownload the CircuitPython UF2 Bootloader: https://circuitpython.org/board/cp_sapling_m0/
Check back for the data sheet |
Tutorials
(Tutorial) Slow Tech Temperature Sensor And Indication Using The CP Sapling: https://www.oakdev.tech/tutorials-new-products/tutorial-slow-tech-temperature-sensor-and-indication-using-the-cp-sapling#/
