LogitBits: SMD Solder & Learn Kit by Island Robotics
After not finding a suitable kit that provided a simple way to learn logic gates and boolean logic, Island Robotics decided to create the perfect kit that took the complexity out of learning logic gates and having to program in order to make boolean logic fun!
LogicBits is an easy to use and easy to understand logic gates kit which provides a simple but intuitive method for learning basic gate functions. Including AND, OR, NAND, NOR, XOR, and one mystery gate to help delivery a fun and educational experience.
Oak Development Technologies worked with Island Robotics to take this kit a step further to provide a fun SMD or surface mounted device soldering kit to make the educational experience more rounded. This combines the learning effort to gain the skills needed to assemble the kit with the learning effort needed to understand boolean logic and logic gates.
This kit takes roughly two hours to assemble.
Solder/Solder Paste is not included.
Included in the kit is:
- 1x Input Board
- 2x AND Gate Board
- 2x OR Gate Board
- 2x XOR Gate Board
- 2x NOT Gate Board
- 1x Mystery Gate Board
- 4x SMD 40 pin right angle header pins
- 4x AND SMD logic gate IC (1 spare)
- 4x XOR SMD logic gate IC (1 spare)
- 2x NAND SMD logic gate IC
- 2x OR SMD logic gate IC
- 2x NOT SMD logic gate IC
- 36x 0805 SMD Blue LEDs
- 36x 0603 SMD 560ohm resistors
- 3x 0603 220ohm resistors
- 3x 0603 1uF ceramic capacitor
- 11x 100nF ceramic capacitor
- 3x SMD mounted switches
- 1x Power only SMD USB-C connector
- 2x 10cm 3 wire cables
- 2x 20cm 3 wire cables
- 25 magnets & adhesive strips for magnets